In this post, we will add a Tier-1 Gateway for our Segments (Logical Switches) to connect to.
NSX-T 3.0 Series: Part1-NSX-T Manager Installation
NSX-T 3.0 Series: Part2-Add additional NSX-T Manger & Configure VIP
NSX-T 3.0 Series: Part3-Add a Compute Manager (vCenter Server)
NSX-T 3.0 Series: Part4-Create Transport Zones & Uplink Profiles
NSX-T 3.0 Series: Part5-Configure NSX on Host Transport Nodes
NSX-T 3.0 Series: Part6-Depoy Edge Transport Nodes & Create Edge Clusters
NSX-T 3.0 Series: Part7-Add a Tier-0 gateway and configure BGP routing
NSX-T 3.0 Series: Part8-Add a Tier-1 gateway
NSX-T 3.0 Series: Part9-Create Segments & attach to T1 gateway
NSX-T 3.0 Series: Part10-Testing NSX-T Environment
It’s a gateway that connects to Tier-0 router via its uplink and to our segments through downlink. You can define on which routes to be advertise from Tier-1 Gateway. Check my previous blog for Tier-1 gateway topology.
Log into NSX-T Manager VIP and navigate to Networking >Tier-1 Gateway > ADD TIER-1 GATEWAY
Name: Give an appropriate name.
Linked Tier-0 Gateway: Select the Tier-0 Gateway that we created in earlier post.
Edge Cluster: Select associated cluster.
Scroll down to Route and make sure that all routes are selected.
Rest all option to be default & Click on Save.
That’s it. Short and Simple. 😊
Are you looking out for a lab to practice VMware products..? If yes, then click here to know more about our Lab-as-a-Service (LaaS).
Subscribe here to recevie emails for new posts on this website.